EARTHWORKS (USA) _ FW430 / HC FlexWand

Contact: +84919339977

EARTHWORKS (USA) _ FW430 / HC FlexWand

FW430/HC FlexWand™

Integrated Hypercardioid Microphone, Boom & Stand for Instrument Miking

 

Integrated miking system with 30kHz hypercardioid microphone, low profile microphone stand and boom

  • Wide coverage area

  • Near-perfect polar pattern with high rejection of sounds from the rear of the microphone

  • Handles up to 139dB SPL without distortion

  • Uniform frequency response on or off axis
  • Frequency response up to 30kHz
  • Large flex section near the center of the stand that couples the stand and the wand
  • Mini-gooseneck between the end of the wand and the microphone head
  • Substantial improvement in gain before feedback
  • They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
  • The near perfect polar response of the FlexWand™ allows the use of fewer microphones with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
  • The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over
  • Specifications

  • Frequency Response: 20Hz to 30kHz

    Polar Pattern: Hypercardioid

    Sensitivity: 20mV/Pa (-34dBV/Pa)

    Power Requirements: 24 – 48V Phantom, 10mA

    Max Acoustic Input: 139dB SPL

    Output: XLR (pin 2+)

    Output Impedance: 65Ω balanced (between pins 2 & 3)

    Min Output Load: 600Ω between pins 2 & 3

    Noise: 16dB SPL equivalent (A weighted)

    Positioning Range: From 10 inches to 4.7 feet above floor level

    Dimensions: Stand 4’7″ (1.39m); Base 12″ (30.5cm) in diameter, 1.1″ (2.7cm) high

    Color: Stand, flex & wand – black, base – dark gray

    Weight: Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)

    The Earthworks FW430/HC FlexWand™ Series 4’ integrated microphone systems are floor stand solutions designed for instrument miking applications.

    Performance

    When you do not want to compromise appearance for sound quality, the FW430/HC FlexWand™ provides the best of both worlds. Combining a 30kHz hypercardioid microphone, low profile microphone stand and boom as a single freestanding unit, the FW430/HC delivers a low profile and flexible miking solution for instrument and vocal applications.

    Its near-perfect cardioid polar pattern is consistent across all frequencies, which simplifies microphone placement and and ensures more gain before feedback. With 32dB of rear rejection, it is ideal for live performances where there may be bleed from surrounding instruments.

    Additionally, the FW430/HC FlexWand’s wide coverage area allows for the use of fewer Earthworks microphones with better coverage and sound quality.

    With a low noise floor and extended frequency response, the FW430/HC is ideal for a wide variety of instruments, both in the studio and live onstage.

    Beyond its improved audio performance and coverage, the FlexWand™ is designed with functionality in mind. The microphone head can be positioned as high as 4’ 7” feet and as low as 10 inches from the floor or anywhere in between, allowing a nearly unlimited number of microphone positioning options.

    Additionally, there are no visible wires or cables above floor level. Instead, the microphone cable plugs into the base of the microphone, making it incredibly low profile and clean.

    Construction

    Standing 4’ 7” tall (m) and measuring just .75 inches (19mm) at its widest point, the FW430/HC FlexWand™ provides both height and a very low profile appearance, virtually disappearing from sightlines in the audience or on camera.

    The FW430/HC incorporates a large flex section near the center of the stand that couples the stand and the wand, allowing you to adjust the microphone from its tallest height at 4’ 7” (1.4m) to 10” (0.25m) above the ground and anywhere in between. The mini-gooseneck between the end of the wand and the microphone head lets you precisely and quickly position the microphone for optimal coverage.

    The sturdy cast iron base provides enough weight so that there is no concern of the FW430/HC FlexWand™ falling over if it is bumped into. Rather, the microphone easily stabilizes itself.

    Optional 2 and 3 foot extensions available separately for added height.

    Options

    The FlexWand™ microphones have cast iron or tripod base options. Available in cardioid or hypercardioid. Matched pairs available.

    Chào đón hợp tác

    Cho dù là siêu dự án hay một đơn hàng nhỏ lẻ

    Chúng tôi mong được hợp tác và trân trọng cảm ơn sự tín nhiệm của Quý khách hàng!

     

    Lên lịch tư vấn với chúng tôi bằng cách điền vào biểu mẫu liên hệ trực tuyến, hoặc liên hệ trực tiếp với chúng tôi theo thông tin sau đây:

     

    ĐỐI TÁC CHIẾN LƯỢC MỘT ĐIỂM DỪNG CAO CẤP

    ➤ Tư vấn - Thiết kế - Tích hợp giải pháp công nghệ tiên tiến

    ➤ Nhập khẩu - Phân phối - Cung cấp hệ thống thiết bị từ nhiều thương hiệu danh tiếng hàng đầu thế giới trong lĩnh vực.

    ➤ Dịch vụ kỹ thuật chuyên nghiệp

     

    CÔNG TY CÔNG NGHỆ BÁ HÙNG

    Bá Hùng Technology Co.,

    • Địa chỉ: 7-8-9 Dãy 11A, Đường Chánh Hưng (Phạm Hùng), Phường 4, Quận 8, TP. HCM, Việt Nam
    • Site: https://bahung.com
    • Fanpage : https://m.facebook.com/AmthanhBaHung

    Ms Helen (Thuỳ Hương), Vice President - Project Director 
    (hỗ trợ Dự án – Chủ đầu tư - Nhà Tổng thầu – Nhà thầu - Đại lý - Bán buôn - Partner / Freelancer)

    • Hotline: +84 919339977
    • Email 1: info@bahung.com
    • Email 2: helenvu999@gmail.com

    James Dynamic, CEO 
    (hỗ trợ Tư vấn Thiết kế & Tích hợp hệ thống)

    • Hotline: +84 908410817
    • Email: ceo@bahung.com

    Other products from the same manufacturer

    Khám phá một giải pháp thành công!

     Tìm kiếm thông tin cụ thể?  Hay Qúy đối tác muốn thảo luận về dự án của qúy vị với chúng tôi và khám phá một giải pháp thành công?  Chúng tôi rất muốn nói chuyện với bạn.  Đừng ngần ngại gọi cho chúng tôi +84919339977 hoặc để lại thông tin của bạn để chúng tôi liên hệ.