EARTHWORK _ SR314
SR314
Live Vocal Microphone
Distinctive design. Sonic accuracy. Legendary performance.
Explore the Earthworks SR314.
Exceptional Materials
Stainless steel is expertly sculpted through precision machining yielding an instrument that is beautiful to look at, balanced in the hand, and sensibly engineered for life on the road.
The Magic Inside
Protected within its steel exoskeleton is a studio quality small diaphragm cardioid condenser capsule coupled with a Class A amplifier circuit that leverages Earthworks patented and proprietary technologies to deliver one of the fastest mics on the planet.
rue Voice
An extended flat frequency response and a focus on time coherence (fast clean impulse response) sets the Earthworks SR314 apart. By systematically eliminating the many layers of distortion and noise normally added by each acoustic and electronic component, the Earthworks SR314 doesn’t sound like a traditional microphone – it pulls back the veil to reveal the true voice of the artist.
Simple, Easy and Brilliant
The SR314 democratizes exceptional live music experiences, making them accessible to everyone. Quicker soundchecks and better monitor and in-ear mixes let artists focus on what matters most – the music.
asy Engineering
Engineers are unencumbered from the necessities of corrective EQ, heavy compression, de-essing and constant vigilance against feedback.
Sound That Connects
Audiences reap the benefits of vocals that sit comfortably and easily in the mix, with every detail and nuance bridging the gap that so often separates the audio experience of live music from recordings.
Built For Live Music
A tight cardioid polar pattern with a consistent frequency response all the way out to 90 degrees means the SR314 delivers the same quality of sound even when the singer moves off-center.
Goodbye Feedback
Maximum rejection of sound sources at 180 degrees imbues the SR314 with levels of feedback immunity and isolation from unwanted sound sources not found in other microphones.
Frequency Response | 20Hz – 30kHz |
Polar Pattern | Cardioid |
Sensitivity | 10mV/Pa (-40dBV/Pa) |
Power Requirements | 24-48V Phantom, 10mA |
Max Acoustic Input | 145dB SPL |
Signal-to-Noise Ratio | 79dB A-weighted |
Output | XLR (pin 2+) |
Output Impedance | 65Ω balanced (between pins 2 & 3) |
Min Output Load | 600Ω between pins 2 & 3 |
Noise | 15dB SPL equivalent (A weighted) |
Dimensions (L x D) | 181.1mm x 40.6mm (7.13 x 1.60 inches) |