EARTHWORKS _ M30

Contact: +84919339977

EARTHWORKS _ M30

M30

30kHz Measurement Microphone

Accurate in the time domain and frequency response, the M30 is the measurement microphone is remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise

  •  

    3Hz – 30kHz flat frequency response

  •  

    Omnidirectional polar pattern

  •  

    Handles up to 140dB SPL without distortion

 

  • 30kHz flat frequency response
  • Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
  • Improved version of the SMAARTMIC™ previously offered by EAW
  • Omnidirectional polar pattern
  • Flat frequency response, fast impulse response and exceptional polar characteristics
  • Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
  • Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  • Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
  • Electronic Calibration File available
  • Operating Temp Range: -20 deg C to +60 deg C ( -4 deg. F to 140 deg. F)
  • Storage Temp Range: -40 deg C to +80 deg C ( -40 deg. F to 176 deg. F)
  • Humidity: Up to 90%
  • Re-calibration recommended every five (5) years

 

Frequency Response: 3Hz to 30kHz ±1/-3dB

Polar Pattern: Omnidirectional

Sensitivity: 34mV/Pa (-29dBV/Pa)

Power Requirements: 24 – 48V Phantom, 10mA

Max Acoustic Input: 140dB SPL

Output: XLR (pin 2+)

Output Impedance: 65Ω balanced (between pins 2 & 3)

Min Output Load: 600Ω between pins 2 & 3

Noise: 20dB SPL equivalent (A weighted)

Dimensions L x D: 229mm x 22mm (9 x .860 inches)

Weight: .5 lb. (225g)

 

 

https://earthworksaudio.com/products/microphones/measurement-series/m30/

M30

30kHz Measurement Microphone

Accurate in the time domain and frequency response, the M30 is the measurement microphone is remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise

  •  

    3Hz – 30kHz flat frequency response

  •  

    Omnidirectional polar pattern

  •  

    Handles up to 140dB SPL without distortion

 

Description

The M30 is a precision engineered 30kHz omnidirectional measurement microphone ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required.

Performance

Accuracy, consistency, and reliability have made the Earthworks M30 measurement microphone the first choice of live sound professionals, acousticians, and researchers all over the world for nearly twenty years. Used on countless full-scale concert tours, as well as in scientific research laboratories, tropical rainforests, and rocket testing facilities, the M30 and its M-Series siblings have proven to be lab-grade audio instruments that can handle any environment.

The M30’s audio performance is unparalleled. It has a flat frequency response that extends from 3Hz to 30kHz, an exceptionally consistent omnidirectional polar response, 140dB SPL rating without distortion and no handling noise. With temperature compensated electronics, the M30 was built to deliver repeatable results no matter what the environment.  

Extremely fast impulse response and linear phase response make the M30 ideal for use with high-quality FFT-based real-time audio system measurement software like SMAART™, SIM™, REW™, Electroacoustics Toolbox™, FuzzMeasure™ and others, as well as for use in PA system alignment and loudspeaker design.

Every M30 is individually hand-tuned and tested and is delivered with its own printed frequency response chart. An Electronic Calibration File (ECF) is generated for each microphone during final testing, and can be downloaded free of charge after product registration.

Chào đón hợp tác

Cho dù là siêu dự án hay một đơn hàng nhỏ lẻ

Chúng tôi mong được hợp tác và trân trọng cảm ơn sự tín nhiệm của Quý khách hàng!

 

Lên lịch tư vấn với chúng tôi bằng cách điền vào biểu mẫu liên hệ trực tuyến, hoặc liên hệ trực tiếp với chúng tôi theo thông tin sau đây:

 

ĐỐI TÁC CHIẾN LƯỢC MỘT ĐIỂM DỪNG CAO CẤP

➤ Tư vấn - Thiết kế - Tích hợp giải pháp công nghệ tiên tiến

➤ Nhập khẩu - Phân phối - Cung cấp hệ thống thiết bị từ nhiều thương hiệu danh tiếng hàng đầu thế giới trong lĩnh vực.

➤ Dịch vụ kỹ thuật chuyên nghiệp

 

CÔNG TY CÔNG NGHỆ BÁ HÙNG

Bá Hùng Technology Co.,

  • Địa chỉ: 7-8-9 Dãy 11A, Đường Chánh Hưng (Phạm Hùng), Phường 4, Quận 8, TP. HCM, Việt Nam
  • Site: https://bahung.com
  • Fanpage : https://m.facebook.com/AmthanhBaHung

Ms Helen (Thuỳ Hương), Vice President - Project Director 
(hỗ trợ Dự án – Chủ đầu tư - Nhà Tổng thầu – Nhà thầu - Đại lý - Bán buôn - Partner / Freelancer)

  • Hotline: +84 919339977
  • Email 1: info@bahung.com
  • Email 2: helenvu999@gmail.com

James Dynamic, CEO 
(hỗ trợ Tư vấn Thiết kế & Tích hợp hệ thống)

  • Hotline: +84 908410817
  • Email: ceo@bahung.com

Other products from the same manufacturer

Khám phá một giải pháp thành công!

 Tìm kiếm thông tin cụ thể?  Hay Qúy đối tác muốn thảo luận về dự án của qúy vị với chúng tôi và khám phá một giải pháp thành công?  Chúng tôi rất muốn nói chuyện với bạn.  Đừng ngần ngại gọi cho chúng tôi +84919339977 hoặc để lại thông tin của bạn để chúng tôi liên hệ.