Contact: +84919339977
CADAC _ CDC PSU4800
Bộ cấp nguồn chuyên dụng cho mixer CADAC (Eight, Seven, Six, Five) _ CDC PSU4800
■ The CDC PSU 4800 is a 2U unit supplying all DC voltages required by the control surface via a single multiway cable terminating in a 12-pin Jaeger connector.
■ There are three DC power rails: +18 V, -18 V and +12 V.
Front panel
■ Mains switch – this is the mains disconnect device for the console.
■ Mains fuses – one each in the line and neutral of the AC input. See table below for ratings.
■ DC output LEDs – one red LED for each DC output.
■ Air intakes – do not obstruct.
Rear panel
■ AC mains input – Neutrik powerCON TRUE1 male connector. Max rating 16 A.
■ AC mains output – female connector paralleled to [5]; may be used to link AC mains to a second PSU or other equipment. Total AC current consumption when linking units in this way must not exceed the input connector’s current rating of 16 A.
■ POWER OUTPUT – locking 12-pin Jaeger connector. Connect to the control surface with the cable supplied.
■ Air exhaust vents – do not obstruct.
.jpg)
.jpg)
.jpg)
